![]() Insert the foot controller plug into its jack/socket. If it still does not fit, contact a qualified electrician to install the proper outlet.If the plug does not fit fully in the outlet, reverse the plug. To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. This appliance has a polarized plug (one blade wider than the other).If a power outage occurs while the sewing machine is being operated, turn off the sewing machine and unplug the power supply cord.The sewing light goes off when the machine is turned off. To turn off the machine, set the main power switch to “O”. When the machine is turned on, the needle and the feed dogs will make sound when they move this is not a malfunction.ģ. Push the spool pin down until it locks into place. The operation buttons differ depending on the sewing machine model.Ģ. The needle plate is marked with guides for sewing straight seams.You can start sewing without pulling up the bobbin thread.Quick-set bobbin (for models equipped with the quickset bobbin). ![]() The feed dogs feed the fabric in the sewing direction.Use when removing the needle plate cover.Attach the appropriate presser foot for the selected stitching. The presser foot applies pressure consistently on the fabric as the sewing takes place.Use the presser foot holder screw to hold the presser foot holder in place.The presser foot is installed onto the presser foot holder.Needle threader (for models equipped with the needle threader).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |